Frequently Asked Questions
- Getting started
- Viewing Online
- Sharing (Clips, timelapse and Facebook Live)
- Email and password changes
- Deleting devices and accounts
- Top tips for reliable recording
- Trouble shooting
- Data, security and behaviour in no network
- Manything Partner Programme - Cloud video monitoring for Hikvision IP cameras
For first time set up watch our tutorial video
Yes, go to your camera settings and check your recording mode is set to “record on motion”. In this mode Manything only records video to the cloud when it detects movement and only live streams when you are watching. This mode uses minimal bandwidth.
For users on a paid for plan there is an optional setting to record and stream continuously, not just on motion.
To talk to your camera device, open the app in Viewer mode, select the camera you want to talk to then select the ‘Talk” tab. Press and hold the green button to record your message.
You can repeat an audio message every time motion is detected by turning on the ‘Repeat on motion’ button.
If your camera is an iOS device on iOS 6 then please set its volume to the maximum to ensure your message will be heard (devices running iOS7 and above we will automatically play your audio at the device's maximum volume)
Your video is stored securely in the Manything cloud. We don’t store any video to the device unless there is a loss of network.
You can download Manything to as many devices as you need and set them up as either cameras or viewers. You will need one of our paid for plans if you want to use more than one recording device at a time. Manything will also work across operating systems (iOS and Android). For example you can use an old iOS device as your camera and an Android device as your viewer.
Use the same login details across all the devices you're using for Manything, this is how we connect all your devices to your Manything account.
Logging in to Manything via a Facebook id has sometimes been unreliable. Also Facebook is withdrawing support for iOS6 & iOS7, so we have decided to stop allowing new registrations via a Facebook id. If you have previously created a Manything account using your Facebook id, you can still log on that way. However, we recommend that you contact us so that we can help you convert your account to one based on your email address and a password.
Facebook registration only works if you have the same Facebook account on all your Manything devices. We recommend you register with an email address and password that you can use across all devices. Please contact email@example.com if you’d like to change your Facebook login to an email login.
Open the Manything app on the device you want to use as your viewer and log in using the details you first registered with. Select “Viewer” to see your cameras, live streams and motion events. To view video on an iOS device you’ll need that device to be running iOS 8 or above (your camera device can run on iOS 6 and above).
You can also view your live cameras and recorded video online at the manything website. For cameras set to "record on motion" the stream will connect when you view your camera and you will be able to click forward and back to any captured motion events. For cameras set to record continuously you will be able to watch live sessions and playback full recorded sessions.
You can turn on push notifications or email alerts from your Manything camera’s setting menu. To receive the notifications make sure you’re logged into the Manything app on the phone you want to receive the notifications on and check you have allowed notifications from Manything in your device's main settings.
You can adjust the "Sensitivity Threshold" from the settings menu on the device you're using as your camera. 1 triggers on small motion and above. 10 will only trigger alerts on large movements. Detection Zones are a good way to mask out areas of the screen that you don't want to trigger an alert (for example a tree blowing in the wind). Detection zones can be found in the settings menu of the device you're using as your camera. Draw a mask over the areas that you don’t want to trigger motion. The mask will remain on for all recordings until you remove it.
Yes, you can enable sound detection in your Manything camera settings.
You can enable ‘Camera status’ alerts from the settings menu of your camera device. This will alert you when we detect that your camera has been offline for 10 minutes and it will alert you to changes in your battery status.
We don't have any immediate plans for a Mac version.
Any device running Manything will feel warm to the touch when it's running and hot if you hold the area on the back where the main processor lives. This is completely normal and no hotter than the device would get if you watched a YouTube video on it. To reduce heat turn the screen brightness all the way down before you leave the camera running and leave your device out of direct sunlight.
Although Manything streams the video straight off to the cloud you do need at least 250MB of storage free on your phone in order for Manything to run, if not you will get an error message that says "out of diskspace".
We recommend that you only use the power supply that came with your device when new, or an identical replacement. There are reports of counterfeit power supplies not being as reliable – including overheating and causing a fire risk. This is not just some lawyer-inspired suggestion for maximum safety – we know some of our users will have their devices powered for a long time to run our application. Only do so with genuine power supplies.
You can currently only schedule your Manything cameras by using our IFTTT integration. There's more information on how to use IFTTT with Manything here. Email firstname.lastname@example.org for any help of advice setting up IFTTT recipes.
To reactivate your old iPhone you will need to insert a SIM card from the carrier that the iPhone is locked to (if it's carrier unlocked, any SIM will work). You can use an old or borrowed SIM card for this as the SIM is only required during the activation process. Once the device is activated you can remove the SIM card and continue to use the device as WiFi only. You will be prompted to connect the device to your WiFi network during the setup/activation process. When the device is up and running and on the home screen you can log into the App Store with your Apple ID (you can have more than one device per Apple ID) and download the Manything app.
The SIM card sizes for Manything compatible iPhones are shown below:
- iPhone 3GS - Mini SIM
- iPhone 4 and 4S - Micro SIM
- iPhone 5, 5S, 6 and 6 Plus - Nano SIM
Note: If you have a SIM which is too small for the iPhone you are trying to activate you can purchase an adapter to suit.
We have the following options for low light usage on the iOS version of the app only:
- You can set the flashlight to come on for 30 seconds when there is a noise. This might allow you to capture an intruder on video, or to record an animal in your garden.
- You can set Manything to switch automatically between video in good light to ‘enhanced still images' in low light. These enhanced images are recorded every 10 seconds, and are created by adding several images together. The pictures can be grainy, but can show much more detail than a conventional photograph.
- Alternatively we have found using Manything with a motion activated light works well at night time.
No. Apps running in the background cannot access the camera. If you press the Home button (the round one on the front) while you're recording, the recording session will end.
If you press the Lock button you're sending Manything into the background. When running in the background it cannot access the camera and so it cannot record any video.
If you are using an iOS device as your camera you can still keep your device safe without killing your live stream by enabling “Guided Access” mode. "Guided Access" means you can lock down your iOS device and prevent others from accessing things you don't want them to.
- Go to your device's main settings - General - Accessibility -Guided Access. Turn Guided Access ON and set a PIN number for your passcode.
- Open the Manything app on the device you’re using as a camera.
- Triple-press the home button on your camera device and tap "Start" in the top-right corner to enter Guided Access mode. This will lock the screen
Please note: In order for the screen to be locked you must ensure that touch is disabled within Guided Access. You can do this by triple pressing the home button and pressing options in the bottom-left corner.
To exit Manything triple press the home button and enter your pin.
Details of our free and paid for plans can be found on our pricing page. Please note the prices listed on our website are for subscriptions purchased online with Paypal. Subscriptions purchased in the app with your Apple ID or via Google Play have a slightly higher price.
Prices for plans bought online with Paypal are lower than our prices in the app. This is because we don’t have the App Store or Playstore commission to pay so we are able to pass a discount on to our users. If you have bought in app and would like to change to an online plan with PayPal please contact us for further advice.
You'll never be charged and you will always be on a free account unless you choose to upgrade to one of our paid for plans.
Please contact us at email@example.com to discuss enterprise pricing.
You have the option to sign up for a monthly subscription either via the Manything website using a PayPal account or in the Manything app using your Apple ID (iOS) or via Google Play (Android).
You can change or cancel your monthly subscription plan whenever you need.
If you've signed up to a monthly subscription via the web with PayPal and want to upgrade we'll charge you the difference for the remainder of the month and upgrade you immediately. If you downgrade or cancel your existing subscription it will run until the next monthly rollover date (we do not give partial refunds).
If you've signed up to a monthly subscription via the app with your Apple ID and upgrade you’ll be charged the full amount for your new subscription straight away. If you want to downgrade you will need cancel your subscription in your iTunes account and re-subscribe to a new plan. You can cancel at anytime by managing your Apple subscriptions.
If you subscribe via the Google Play Store and upgrade or downgrade your new plan will take effect immediately. Any unused balance from the old subscription will be applied on a pro-rated basis to the new subscription.
If you have subscribed with PayPal you can cancel your plan from your Account page in the website.
If you have subscribed in the app with your Apple ID you will need to:
- Open the main settings cog on your Apple device.
- Select "iTunes & App Store"
- Tap your Apple ID, then select "View Apple ID" in the pop-up
- Sign-in to your Apple ID if prompted.
- Scroll down and tap "Subscriptions"
- Select and cancel your subscription to Manything.
- Your subscription will now be cancelled and you will be able to carry on using the service until the end of your subscription period. Apple will send you a confirmation email.
If you have subscribed via Google go to the Google Play Store App and select 'My Apps', 'Subscriptions', select Manything and press cancel.
The plans refer to the number of Manything cameras you have recording simultaneously. It does not refer to the number of devices you have registered on your account. We don't count the viewing device.
Our upgrades are non-refundable once purchased.
The latest version of the Manything website no longer requires Flash. It comes with the following additional improvements:
No more short gaps in video when playing back recorded events - The short gaps in video when playing back recorded events or sessions has now been fixed for a much smoother playback.
Go full screen - We’ve added a new icon at the bottom right of the viewing window that you can easily click to view live and recorded video at full screen.
Fast forward through motion events - Use the cursor under the viewing window to quickly move through motion events (not yet available on full sessions).
Lag - You may notice a slightly longer lag on your live stream. If you prefer to use the previous version of our website that still requires Flash you can still access it from this link: flash.manything.com. Support for this version will eventually be phased out.
iPhone 5 cameras - If you use an iPhone 5 as your camera you may notice your live streams play with a green screen when using Safari and Firefox. Please use Chrome or revert to our previous website available at flash.manything.com to solve this.
iPad - The new version of the website is no longer compatible with the iPad. You can still view your live video and recorded motion events on the iPad using the Manything app that can be downloaded by clicking here. If you still prefer to use our previous website on your iPad you can access it from here: flash.manything.com
Supported browsers - You can see which browsers are supported by clicking here
Sharing (Clips, timelapse and Facebook Live)
From your 'Viewer' device select the event you’d like to share or download. You’ll see options to Share, Download or Delete the event.
'Share' gives you the option to share a picture, a file, or a link to your motion event.
'Download' will save the event to your devices photo roll.
Go to manything.com, select 'Cameras' then 'Events' and select the event you’d like to download. You’ll see the options to Share Link, Download Event, Create Clip or submit it to the public Clip Chart.
Go to the Manything website. Choose and play the session you'd like to edit and select 'Create Clip'. You'll see a blue clip maker appear over your timeline, pull and stretch that into position, then press 'Save Clip'. You can then save, share or download your clip.
You can't create a clip with a mix of stills and video.
You can unshare your clips at anytime. Go to your ‘Shared’ events in the app or in the web to access a list of any events you have shared. Select the event you want to unshare and select ‘Unshare’. This will break the link to the clip so no one with access to the link can watch it.
You can also choose to share your motion event with us and other Manythingers around the world by submitting it to the Manything Clip Chart. Under the event press the button that says ‘Submit to public Clip Chart!’ then assign a category, enter a title and description and press done. You’ll also be entered into our clip awards for a chance to win cloud recording and accessories and we may use your clip in our social or news media.
Clips can take up to 24 hours to go through our review process and be published in the chart.
You can remove your clip from the clip chart by unsharing it. Go to your shared event in the app or in the web and select ‘unshare’. This will unshare the link and it will no longer be visible on the clip chart.
In the Manything phone app select "Stills Only" Mode and also "Mute Audio" from the Settings page, so that Manything takes a still photo every few seconds instead of recording video and audio. When you have finished recording, sign in to the website and select the session you have just made and then click on 'Create Timelapse' under the "Create clips to share" menu.
Once you've made a clip or timelapse you can download it from the Manything website to your Mac or PC.
With our new Facebook Live feature you can choose to share live streams from your Manything cameras to your Facebook page. This feature is optional and all camera feeds are private to you unless you choose to stream them live to your Facebook page.
On the device you use as your ‘Viewer’ select the camera you want to stream live to Facebook. Under the camera’s live stream you’ll see a Facebook Live button. Press the button to start streaming live to facebook. This feature is currently only available on iOS and both your camera and your viewers will need to be running version 4.7 of the app and above.
When you first press Go Live you will be given the option to edit who sees your stream. By default it set to public but you can edit this to be just friends, a group, or just one person. Every time you start a new Facebook Live stream we will remember your last preferences, if you would like to change these you can go to your Facebook settings, Apps, Manything and edit your audience.
It will stream for a maximum of 4 hours, unless you choose to finish it before then. You can stop the Facebook live stream at anytime by pressing the Facebook Live button again in the app, or by going to your Facebook page and deleting the post (in this latter case the video will not be saved to your timeline).
Your recording will be saved to your Facebook timeline.
Email and password changes
If you’ve forgotten your password you can reset it both on our website (www.manything.com) and via the app; here's how:
- Click the log in button
- Click "Forgotten your password?"
- Enter your e-mail address and press send
- You will receive an e-mail with a reset link which should be used within 20 minutes of requesting it
If you have any cameras recording when you change your password they will go offline within 15 minutes.
If you are having problems re-setting your password from the link it may be because the link has broken in the email. Please try copying and pasting the whole link into your browser window, rather than clicking on the link from the email.
If you know your current password you can change it via the "Accounts" page on our website or via the "Account" section in the Manything settings menu on the app (iOS only).
If you have any cameras recording when you change your password they will go offline within 15 minutes.
To change the e-mail address associated with your account you will need to log in to our website and navigate to the “Accounts” page. Remember, if you change your email address or password you will need to sign out and back in again on all your devices too.
Deleting devices and accounts
Deleting entire recorded sessions can only be done via our website at the moment.
To do this, login to www.manything.com from a web browser and navigate to the “My Cameras” page. From there, highlight the recorded “session” you want to delete and you'll see a “Delete” option in the top right corner of the grey bar above the sessions. Alternatively you can delete individual motion events by clicking on the 'Events' tab and following the same steps as above.
You can also delete individual motion events from the app by selecting "Viewer" from the main screen and selecting the device that was used to record them. Swiping left on an event will bring up the delete button.
Once a session or event is deleted we cannot recover the video for you.
You can't yet delete multiple events at once, but we're working on it.
This functionality is available from the Manything website only. If you have any devices that you no longer wish to be associated with your account then you can delete these by going to manything.com and following the steps below:
- Log in to your account and navigate to the “My Cameras” page
- Select the device you wish to delete from the drop-down list
- Select the settings tab (on the right) and then press “Delete Device” which will appear near the bottom.
Please note: Deleting a device will also delete any associated recorded sessions. If you would rather keep the device on your account but hide it from your list of cameras on the iOS app then you can swipe left on the device name and press the hide button.
If you registered with email address and password you can delete your account from the “accounts’ page on manything.com.
If you registered with Facebook please e-mail firstname.lastname@example.org from the e-mail address associated with your Facebook account and we can delete it for you.
Top tips for reliable recording
We hope Manything is already very reliable, but there are several things you can do to help keep your cameras online. Our top tips are:
- Ensure the device is connected to a power source - but only use official charging products when leaving recording devices unattended.
- Make sure you're running the latest version of Manything.
- Keep your device out of direct sunlight, and away from other heat sources, such as radiators. When a device overheats, it shuts down completely - taking the camera offline. If you must have the device in direct sunlight to get the picture you need, then shading it with a piece of white card or aluminium foil can be very effective. Similarly, avoid using a case, so that there is good airflow around your device.
- Disable auto-brightness, turn the brightness to minimum, and make sure that the "Screen dimmer" has not been disabled in the Manything settings menu. This saves a lot of power and creates less heat.
- Select the lowest video quality you're happy with, and mute the audio in our settings menu if you don't need it. If you use stills only mode, reduce the frequency to that which you absolutely need. This reduces the computer-processing load, which saves power and reduces heat. It also lowers the bandwidth required to stream your video.
- If you only use Manything for live viewing, leaving your camera on standby mode (at the record screen, but not recording) substantially reduces power consumption. Simple activate the camera (by using our remote control functionality) when you want to check in, then turn it off again when you're done.
- Close all other applications (you can do this by double-tapping the Home button and then swiping upwards on each app). This makes sure that Manything is not fighting for memory, space, computing power or network bandwidth with anything else.
- If your camera is an iOS device sign out of iCloud and iTunes. This avoids various alert boxes appearing on the screen, which cause the screen to become bright again - which uses more power and creates more heat.
- For iOS devices you can use a feature called Guided Access. This secures your device with a PIN, and will restart the app if it crashes. Instructions can be found here
- Do a cold re-boot of your device (power it off completely and power back on and restart Manything). This helps restore the system memory of the device, low system memory can cause a device to go offline. Rebooting the camera is useful every couple of weeks if possible, especially on older devices as they have less memory to start with.
In most cases changing the video resolution will solve this. We now have 3 resolution options for your Manything Android camera, 320 x 240, 480 x 360 or 640 x 480. If you are having issues with video corruption please try 320 x 240 or 640 x 480. If you still have issues please contact us on email@example.com
In our latest update we only support "Viewer" mode for devices running iOS8 and above. This means that you cannot use an iPhone 3GS, iPhone 4 or an iPod Touch 4th Gen as a Manything viewer as these devices cannot be upgraded to iOS 8 or above. Please see our compatible devices list for more information.
If you are using an iPhone 3GS as your Manything camera the live stream will be muted and you won't get audio. Audio will be available when you playback recorded motion events, provided you weren't watching your camera live when the event was recorded.
On camera devices running iOS 7 there is no option to mute audio. To solve this update to iOS 7.1 or above.
In older versions of the iOS app we drop the audio when there isn’t enough bandwidth to stream both video and audio. Try updating to the latest version of the app and if that doesn’t solve things contact us on firstname.lastname@example.org
In older versions of the app Manything drops to a stills mode when there isn’t enough bandwidth to stream video. Check your camera device is updated to version 4.0 or later. If you still have problems please email email@example.com
If you're already signed in to the Manything.com website when you register a new device, you'll need to sign out and sign back in again to see it listed under your devices. If you are in the phone app, you can hit the refresh button.
On either of your devices select “Camera” then from the Manything settings cog select “Developer” then “Change Device Identity”. The device will then have a new identity in your Manything account and you will need to delete the old device. Please note that deleting a device will delete all its associated event and sessions.
If your WiFi cuts out and then returns sometimes your device can get confused about which network to re-join. Instead of reconnecting the iPhone will ask you to select a network and this will interrupt your recording. To resolve this problem you must take three steps:
- Go into the setting on your iPhone: settings > general > reset and click reset network settings (note that this will remove all network preferences on the phone).
- Go back to settings: settings > WiFi and select your preferred network
- Still in WiFi settings ensure that you have not selected “Ask to Join Networks”
This should ensure that your iPhone connects only to your preferred network when recording.
Here are some known issues that may help you:
- If you're viewing your stream on Safari on an iPhone, iPod or iPad and you have “Private Browsing” enabled your Manything video won’t play. Disabling Private Browsing will solve this, although we recommend that you watch your live streams directly from the Manything app.
- If you’re running IE 9 you won’t be able to review your sessions. We recommend you upgrade to a more recent version of IE to view your video
If you're still having problems, please contact us at firstname.lastname@example.org and we should be able to help you.
Receiving a text, phone call, calendar reminder, low battery warning etc. on your phone will interrupt your recording for about a minute.
We do have a problem with viewing footage on the iPad that we're trying to fix: if you're watching a session that was recorded without sound (either because you'd chosen the 'Mute' option or because of poor network connection) you can't search back within that video, you can only play it from the beginning. You'd need to view it on a Mac or PC.
You will not be able to login in using Facebook if you are in Firefox private browsing mode. To login you will need to disable tracking protection, instructions on how to do that here
Data, Security and Behaviour in loss of network
If connection is lost Manything will go offline but will keep recording for a further 10 minutes, saving video to the device and uploading it when connection is restored.
There is an optional setting to continue recording video (after the initial 10 minutes) when network connection drops. Motion events will be stored to the device until connection is restored, they will then be uploaded to our servers. We will save as many motion events as the device’s storage will allow. This setting is available under ‘Advanced’, ‘Lost Connection Preferences’. If you are on one our paid for plans you can choose to record continuous video to the device.
If you lose power then Manything will carry on streaming video until the device’s battery fails.
Your videos are stored and encrypted in Amazon Web Services (“S3”) as used by thousands of corporations across the world. Access to any of the stored video files is very tightly controlled and requires multi-factor authentication – even our developers do not have access. Authentication to view any of your video is secured by your login name and password and a security token which is generated on our servers. When you view any of your video, whether it’s live or recorded, it is transmitted to you over a secure, encrypted channel (“TLS” or “HTTPS”). Please contact us at email@example.com for more detail on our security and encryption.
There are several causes for a camera going offline:
- Poor network connection.
- Over heating - If the device is left in direct sunlight or near a heater it can overheat and automatically shut down.
- Low battery - make sure you leave your device connected to power using a genuine charger. You can check your camera’s battery status remotely from the app and the web.
In “Record on Motion” mode Manything will use on average 15 MB per hour. This number will vary depending on the amount of motion detected.
In “continuous recording” mode Manything uses an average of 120MB per hour. The exact figure in any given scenario is dependent on the selected video quality and the amount of motion being recorded. To conserve data usage Manything will drop to 100 kbps bit rate and 6fps when there is no motion detected.
Go to your camera settings and check you have selected "Record on motion". This mode uses a fraction of the bandwidth of Continuous recording. If you do need to record continuously there are several steps you can take to both reduce and limit Manything’s bandwidth usage. These are detailed below.
Change the video quality:
There are 6 options to choose from here and data usage will be reduced when a lower setting is selected. The default is “fair” and we find this a good balance of both video quality and data consumption. Users who are not concerned with usage and have faster connections might like to experiment with higher video quality settings.
We’ve found that activating the mute audio settings can save as much as 40MBytes per hour depending on the level of sound during the recording. The quality of the image will not be affected.
This setting is for those who wish to keep data consumption to an absolute minimum (or prefer only stills to be captured). Users can adjust the frequency with which stills are captured; the options range between 3 seconds and 60 seconds. Audio can be both activated and deactivated in stills mode and motion detection will still function.
Set a Data Limit:
Users have the option to cap Manything’s data usage at a specified monthly limit and select their preferred rollover date. The settings range from 2GB – 20GB for broadband and 100MB to 2GB for cellular data (which can also be enabled/disabled). There is also an unlimited setting for both. Please note: All of the above can be changed in the Manything settings menu on the device being used as a camera, or via remote control from another iOS device (see Remote Control).
If your camera is running over a cellular network you can choose to only live stream over cellular, and to only upload recorded motion events when the device is connected to wi-fi.
Yes, but by default this is not enabled. Go to your camera settings and turn on “Allow cellular data”. You can also set a data limit so you don’t exceed your plan; this is set to 250MB but can be adjusted.
To get video and audio working sensibly you need around 250Kbit/s (sometimes written 250Kbps) up to the Internet – note that speeds are often quoted as download speeds but in this case you need to look at the upload speed. Almost all DSL and cable connections are good enough.
If you use Manything where there is no Internet connection you can set it to record motion events (or still images) to the device. These will then be uploaded once connection is restored. This setting is available under ‘Advanced’, ‘Lost Connection Preferences’.
When Manything doesn’t detect any interaction between a user and their video (for example the mouse hasn't moved for over 15 minutes), it pauses the displayed video as it assumes you're not watching it. (your camera will still be streaming and recording). This happens on free accounts only.
Depending on which country you're using Manything in you may be subject to laws covering things such as Privacy and Data Protection. Often there are distinctions between recording in a public place or on your own property. There are also often distinctions between use by private individuals and organisations, in some jurisdictions there are even distinctions between recording audio and video. In some places hidden cameras are unlawful, in some they aren't.
It is hard then to give any general advice on complying with the law in every country; we recommend you find out for yourself in your location and your circumstances. We have written some general notes below, but we are not lawyers so the best we can do is point you to other places as a start on checking out your local law.
Don't video anywhere where someone has a reasonable expectation of privacy e.g. a bathroom. This is probably covered by 4th Amendment rights as well as not being very nice. Local and state laws vary significantly and often cover hidden recording and particularly audio recording. We have not found a concise summary of all the local and state laws covering privacy in the USA; if you find one please let us know.
Check the information on the Information Commissioners Office Website. Note that in the UK there is a distinction between business and private or household uses - as of May 2013 the ICO website says "The Data Protection Act does not apply to individuals' private or household purposes. So if you install a camera on your own home to protect it from burglary, the Act will not apply." If you're an organisation rather than a private individual then the ICO publish a guide on the issues around using CCTV which again can be found on their website.
The Australian Government has a website for the office of the Australian Information Commissioner that covers privacy and information law it can be found here.
A number of provinces have laws and oversight offices on privacy – a starting point might be the Office of the Privacy Commissioner of Canada which has links to oversight offices for each province.
Manything Partner Programme - Cloud video monitoring for Hikvision IP cameras
Please contact firstname.lastname@example.org for further advice and information.
Yes! You can add the Manything cloud to your Hikvision installations and get recurring monthly revenue. See our partners page (manything.com/partners.html) for more information about the benefits and how to become a Manything partner.
Manything is compatible with the R6 platform of Hikvision cameras that are listed below.
Mini dome cameras
Mini bullet cameras
Not yet, but we expect to extend compatibility to Hikvision OEM cameras in the near future.
The Manything app scans the local network for compatible devices. This takes a few seconds. Then with one tap in the app, Manything will update the firmware on the network camera and install a specially developed version of the Manything app, adding the camera to your customer’s Manything account with no port forwarding and no router configuration required. This transforms the camera into a remote controllable Manything cloud enabled camera that is optimized for uplink speeds as low as 150Kbps. It also works with or without an NVR (how to do this) To get started, go to ‘Hikvision cameras’ within the main menu of the Manything app (this is currently only available on iOS devices running iOS 10, Android coming soon).
Live streams are in standard definition and use the sub stream of the camera. The live stream has a variable bit rate (150-450 kbps) to cope with poor uplink speeds.
Motion events are recorded at 720p using the camera’s main stream. If the cameras are linked to an NVR, the video recorded to the NVR will be at the native resolution of the camera.
Network cameras running the Manything app only make outbound connections to Manything servers. Normally you have to allow inbound connections to connect network cameras over the Internet, which can make them vulnerable malicious software. Our approach is inherently more secure.
We are still at the early stages of testing all the variants, but we have confirmed that it is possible to run Manything on network cameras alongside Hikvision NVRs. To do this you must either connect the cameras directly to the LAN or you must use one of the camera ports on the NVR to connect it to theLAN. If you use the latter method, you’ll also need to keep the NVR connected to the LAN through the NVR LAN port. You may need to re-configure the NVR to see the cameras under some circumstances.
Contact us at email@example.com to find out more about monthly subscription costs for IP camera cloud recording.
To remove the app go to the ‘Open Platform’ tab in the Hikvision camera web interface, select Manything and click Stop. That will leave the app in place but will stop it from running. To remove the app completely you just need to click Delete.
Our app requires, and so installs, a special “Open Platform” version of the Hikvision firmware. It’s not necessary but if you’d prefer to go back to the stock firmware you can download the desired version from http://www.hikvisioneurope.com/portal/?dir=portal%2FProduct%20Firmware%2FFront-ends%2F01--IPC%2FR6%20platform%20%282X22FWD%2C%202X42FWD%2C%202X52%29"" and use the System / Maintenance / Upgrade / Firmware function in the Hikvision camera web interface to install it.
No, you can install Manything on the cameras in advance from your own offices - the cameras and the device running the Manything smartphone app just need to be on the same network at the time of set-up. You can then take them to your customer and put them onto their network.
You will be the main point of contact for your customers, they will use a co-branded version of the Manything app that will include your company logo and contact details. We'll soon be launching a Partners Portal on our website which will give you access to installer/distributor FAQs along with other materials. The Manything support team will also be available to answer any questions you have.
We are developing a Manything Partner Portal where you can manage your customer accounts. Here you will be able to set up new customers, manage current customer plans and see your invoices. All customers registered in the portal will be attributed to you and they will see a co-branded version of the Manything app with your logo and contact details when they login. In the meantime please contact firstname.lastname@example.org with the username of your customers and the cloud plan they are signing up to.
We currently only support record on motion, meaning only motion events are recorded and stored in the Manything cloud.
Installers will have access to a co-branded version of the app. White label versions are limited to distributors of Hikvision cameras with nationwide coverage. Please contact us at email@example.com for further information.
Yes, you have the flexibility to set the pricing levels for you customers. You will be invoiced monthly by Manything, this invoice will be calculated using our RRP list prices for the plans your customers are on.
Please contact us for printable and downloadable marketing materials and information you can add to your own website. This will be available on the Manything Partner Portal in due course.
Our direct end users are using smartphones or tablets as their recording devices, these record in standard definition only. Our IP camera pricing plans are more expensive as they record in HD and therefore cloud storage is more expensive.
Beware of unscrupulous sellers of Hikvision cameras, operating through platforms such as eBay and AliExpress, performing after-market firmware modifications to bypass regional restrictions and undercut standard retail pricing. Some of these cameras come in Chinese packaging, but more recently they have been found in authentic-looking international packaging. Under some circumstances, these modified cameras can be “bricked” by any attempt to upgrade the firmware. Since Manything installs new firmware to your camera as part of the install process, there is a risk to your camera if it happens to have come to you via such a source. We attempt to avoid this scenario by installing only to cameras that are running a recent firmware version (5.4.0 or above) and that report (according to their firmware) an “international/USA” region code (“WR”)If you have any doubts about the authenticity of your camera, though, we recommend you contact your distributor for advice. If your camera is authentic but is running firmware older than 5.4.0, Manything will detect it but won’t install newer firmware - you will need to upgrade the firmware to 5.4.0 or later yourself, following the manufacturer’s instructions. Note that the upgrade to 5.4.0 is not reversible.